Previous Article | Next Article ![]()
Clinical and Diagnostic Laboratory Immunology, May 2003, p. 339-344, Vol. 10, No. 3
1071-412X/03/$08.00+0 DOI: 10.1128/CDLI.10.3.339-344.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Transplantation Immunology Laboratory,1 Center for Immunology & Microbial Disease, Albany Medical College, Albany, New York 12208-34792
Received 7 December 2001/ Returned for modification 6 November 2002/ Accepted 17 January 2003
|
|
|---|
|
|
|---|
The availability of the Promega PinPoint Xa protein purification system now makes the construction of rbhIL-2 possible. This system takes advantage of the fact that Escherichia coli produces a naturally biotinylated protein that is essential for fatty acid synthesis and growth of this organism (2, 18). The Promega PinPoint Xa vector contains a biotinylation tag similar to that present in the endogenous protein and is designed for the production and purification of fusion proteins, which uniformly contain a single biotin. In chemical biotinylation, the number of biotins per protein molecule is variable. Also, in the Promega PinPoint vector system, the biotinylation tag can be easily removed by enzymatic cleavage should one wish to remove the biotinylation stub once the cytokine is purified. Furthermore, biotinylated fusion proteins produced in this fashion can be affinity purified using the SoftLink soft-release avidin resin, which, importantly, permits elution of the fusion protein under nondenaturing conditions.
In this paper the generation of an rbhIL-2 fusion protein is described, as well as its use to monitor human T-cell activation in vitro. This biotinylated fusion protein binds both streptavidin (SA) and the IL-2-specific antibody (Ab) and induces the proliferation of a murine IL-2-dependent T-cell line, CTLL-2. Furthermore, by utilizing fluorescein isothiocyanate (FITC)- or horseradish peroxidase (HRP)-labeled SA in combination with the rbhIL-2, antigen- and mitogen-induced T-lymphocyte activation can be monitored via flow cytometry or chemiluminescence assay, respectively.
|
|
|---|
Purification of the rbhIL-2 protein. The transformed E. coli JM109 cells were mechanically lysed with a French press (American Instrument Co., Inc., Silver Spring, Md.), and the rbhIL-2 was isolated on a SoftLink Avidin column as described by the manufacturer (Promega). The eluate containing the rbhIL-2 was concentrated using a Speed Vac concentrator (Savant, Hicksville, N.Y.) and dialyzed against phosphate-buffered saline (PBS) using a Slide-A-Lyzer cassette (15-kDa exclusion; Pierce Chemical Co., Rockford, Ill.). Purity was verified using Western blotting, and the protein concentration was determined using the biocinchoninic acid assay as specified by the manufacturer (Pierce).
SA binding and IL-2-specific Ab recognition of rbhIL-2. To illustrate SA binding by rbhIL-2 and its recognition by an IL-2-specific Ab, an enzyme-linked immunosorbent assay (ELISA) was performed. A high-binding 96-well ELISA plate (Corning Inc., Corning, N.Y.) was coated with 10 µg of SA (Pierce) per ml in PBS and incubated at 4°C overnight. After the wells were washed three times with PBS containing 2 mg of bovine serum albumin (BSA) per ml and 0.02% sodium azide (PBS-BSA), they were blocked with PBS-BSA at room temperature for 1 h. The blocking solution was discarded, rbhIL-2 was added to appropriate wells, and the wells were incubated at room temperature for 90 min. The wells were then washed three times with PBS-BSA, and goat anti-human IL-2 (R&D Systems, Minneapolis, Minn.) was added for 4 h at room temperature. After the wells were washed three times with PBS-BSA, rabbit anti-goat IgG-alkaline phosphatase (AP) (Vector Laboratories, Inc., Burlingame, Calif.) was added at a 1:500 dilution in PBS-BSA, and the wells were incubated at room temperature for 90 min. The wells were then washed three times with PBS-BSA, and 1 mg of AP substrate (Sigma) per ml diluted in ELISA buffer (0.05 Na2CO3, 10 mM MgCl [pH 9.8]) was added. The samples were incubated at room temperature for 1 h, and absorbance was read on a microplate reader (Molecular Devices, Sunnyvale, Calif.) at 405 nm.
Stimulation of an IL-2-dependent T-cell line by using rbhIL-2. To demonstrate rbhIL-2 function, the IL-2-dependent murine T-cell line CTLL-2 (ATCC), which responds to recombinant human IL-2 (rhIL-2), was utilized. The CTLL-2 cells were maintained at 37°C and 5% CO2 for 2 days in 25-cm2 flasks (Becton Dickinson) containing RPMI 1640 (GibcoBRL), 10% fetal bovine serum (Sigma), 10 mM HEPES (Sigma), 2 mM sodium pyruvate (Sigma), 2 mM glutamine (Sigma), 2.5 g of glucose (Sigma) per liter, and 1 U of rhIL-2 (R&D Systems) per ml. The cells were then washed three times with medium and resuspended, and 50 µl of cells/well was plated in a 96-well plate at 5 x 103 cells/well. The plates were then incubated at 37°C and 5% CO2 for 2 days in the presence of rbhIL-2 or rhIL-2 at different concentrations. Subsequently, the CTLL-2 cells were pulsed with 1 µCi of tritiated thymidine ([3H]TdR) (ICN, Aurora, Ohio) 24 h before being harvested. The cells were harvested using a Harvester 96 (Tomtec, Hamden, Conn.), and [3H]TdR incorporation was measured using a 1450 microbeta liquid scintillation counter (EG&G Wallac, Gaithersburg, Md.).
rbhIL-2 binding to activated T cells. To demonstrate binding of rbhIL-2 to antigen- and mitogen-activated T cells, human peripheral blood mononuclear cells (PBMC) were isolated from peripheral blood as previously described (7). With regard to the use of human subjects, this research has complied with all relevant federal guidelines and institutional policies. PBMC were resuspended in AIM V (Gibco-BRL) at 2.5 x 106 cells/ml. Then 50-µl volumes of cells were added to individual wells of a 96-well plate containing 5.0 µg of phytohemagglutinin mitogen (PHA) (Sigma) per ml. The plates were then incubated at 37°C and 5% CO2 for 3 days. One day prior to completion of this incubation, 60 µg of rbhIL-2 per ml was combined in equal volume with 120 µg of SA-FITC (Vector) per ml in PBS-BSA and incubated at 4°C overnight on a Vari-Mix rocker. Following the 3-day incubation of cells, stimulated PBMC were washed three times in AIM V and resuspended at 12.5 x 106 cells/ml in AIM V. Then 50-µl volumes of cells were added to wells of a 96-well plate, followed by 50 µl of rbhIL-2-SA-FITC conjugate, and the plates were incubated at 4°C for 2 h with rocking. Biotin-labeled anti-human CD25 (IL-2R) monoclonal Ab (MAb) (Becton Dickinson) bound to SA-FITC was used as a positive control for T-cell activation (IL-2R upregulation) (1). SA-FITC was used as a negative control for rbhIL-2 binding. The cells were then washed three times with PBS-BSA and resuspended in 2% methanol-free formalin in PBS (Eastman Kodak, Rochester, N.Y.). PBMC were analyzed by flow cytometry, and mean fluorescence intensity (MFI) was determined using Cell Quest (Becton Dickinson).
Evaluation of lymphocyte activation by using rbhIL-2-SA-FITC conjugates and flow cytometry. PBMC were resuspended in AIM V with different concentration of tetanus toxoid antigen (TT) (Accurate Chemical & Scientific Corp., Westbury, N.Y.) or PHA and incubated in a 96-well plate as described above. rbhIL-2-SA-FITC conjugate was then combined with stimulated PBMC as described above and incubated at 4°C for 1 h with rocking. The cells were then washed, fixed, and analyzed by flow cytometry.
Cell specificity of rbhIL-2 binding. To demonstrate that the majority of lymphocytes detected in this assay are activated T cells, a lymphocyte activation assay was performed using PBMC incubated for 1 day in AIM V as described above with 1.0 µg of PHA per ml. In this case, however, equal volumes of rbhIL-2 (15 µg/ml) and SA-FITC (60 µg/ml) were combined and incubated at 4°C overnight on a Vari-Mix rocker to obtain the rbhIL-2-SA-FITC conjugate. To identify T and B lymphocytes, mouse immunoglobulin G1 (IgG1) anti-human CD3 peridinin chlorophyll protein (PerCP) (Becton Dickinson) and mouse IgG1 anti-human CD19 phycoerythrin (PE) (Becton Dickinson) were also added to the cells in combination with rbhIL-2-SA-FITC. Mouse IgG1 PE (Becton Dickinson) and mouse IgG1 PerCP (Becton Dickinson) were used as negative controls. The cells were washed, fixed, and analyzed using flow cytometry.
Evaluation of lymphocyte activation using rbhIL-2-SA-HRP and chemiluminescence. PBMC were resuspended in AIM V at 2.5 x 106 cells/ml with different concentrations of TT or PHA and incubated for 1 day as described above. Equal volumes of rbhIL-2 (15 µg/ml) and SA-HRP (Pierce) (10 µg/ml) were combined and incubated at 4°C overnight on a Vari-Mix rocker. The rbhIL-2-SA-HRP conjugate was combined with stimulated PBMC and incubated at room temperature for 1 h with rocking, as was done with the rbhIL-2-FITC conjugate. The chemiluminescence assay was performed as described by the manufacturer (Boehringer Mannheim, Indianapolis, Ind.). The cells were washed three times with PBS and resuspended in 100 µl of chemiluminescence working solution. Chemiluminescence was measured using a 1450 microbeta liquid scintillation counter.
Comparison of the rbhIL-2-SA-HRP assay to lymphocyte activation measured by [3H]TdR incorporation. PBMC were added to plates followed by different concentrations of PHA or TT and incubated for 3 days as described above for the chemiluminescence analysis. To monitor T-cell activation using [3H]TdR incorporation, PBMC were pulsed with 1 µCi of [3H]TdR overnight before being harvested. The cells were harvested, and [3H]TdR incorporation was measured as described above when using CTLL-2 cells to detect rbhIL-2-induced T-cell proliferation.
|
|
|---|
SA binding and Ab recognition of rbhIL-2 by ELISA. ELISA, utilizing SA-coated wells and goat anti-human IL-2, was used to demonstrate the binding of rbhIL-2 to SA and its recognition by Ab specific for human IL-2. When added to SA-coated wells, the rbhIL-2 bound to SA and was detected by the addition of goat anti-human IL-2 followed by rabbit anti-goat Ig-AP. When the PinPoint vector control or nonbiotinylated rhIL-2 was used in place of rbhIL-2, binding of goat anti-human IL-2 was not detected (Fig. 1).
![]() View larger version (24K): [in a new window] |
FIG. 1. rbhIL-2 detection by ELISA. PinPoint vector control (open squares), nonbiotinylated rhIL-2 (solid triangles), and rbhIL-2 (open circles) were incubated in wells coated with SA, and goat anti-human IL-2 and rabbit anti-goat IgG-AP were added. Samples were developed and read as described in Materials and Methods. Data represent the mean and standard deviation for triplicate samples.
|
![]() View larger version (30K): [in a new window] |
FIG. 2. CTLL-2 proliferation in response to rbhIL-2. PinPoint vector control (open squares), nonbiotinylated rhIL-2 (solid triangles), and rbhIL-2 (open circles) were used to stimulate CTLL-2 cells as described in Materials and Methods. Data represent the mean and standard deviation for triplicate samples.
|
![]() View larger version (49K): [in a new window] |
FIG. 3. rbhIL-2 binds to PHA-activated lymphocytes. PBMC were stimulated in the presence of PHA. rbhIL-2 or anti-CD25 combined with SA-FITC was then added, and the fluorescence (MFI) was measured by flow cytometry as described in Materials and Methods. Data represent the mean and standard deviation for triplicate samples.
|
![]() View larger version (22K): [in a new window] |
FIG. 4. rbhIL-2 binding is specific for activated lymphocytes. PBMC were incubated in the presence or absence of PHA and subsequently labeled with rbhIL-2-SA-FITC conjugates as described in Materials and Methods. (A) Dot plot indicating the lymphocyte population gated on for analysis of rbhIL-2-SA-FITC binding. (B) Histogram representing gated lymphocytes and rbhIL-2-SA-FITC binding after incubation in the absence of PHA. (C) Histogram representing gated lymphocytes and rbhIL-2-SA-FITC binding after incubation in the presence of PHA.
|
![]() View larger version (18K): [in a new window] |
FIG. 5. rbhIL-2-SA-FITC binds to PHA- and TT-activated lymphocytes after 1 day of incubation over a wide range of PHA and TT concentrations. PBMC were incubated with different concentrations of PHA or TT for 1 day (open squares), 2 days (solid triangles), or 3 days (open circles) and were then labeled with rbhIL-2-SA-FITC, as described in the text. Data represent the mean and standard deviation for triplicate samples.
|
|
View this table: [in a new window] |
TABLE 1. Specificity of rbhIL-2-SA-FITC conjugate bindinga
|
![]() View larger version (35K): [in a new window] |
FIG. 6. Analysis of T-cell activation by using rbhIL-2 and chemiluminescence versus [3H]TdR incorporation. PBMC were incubated in the presence of PHA (open squares) (A and B) or TT (solid triangles) (C and D) for 1 day for chemiluminescence analysis (A and C), and 3 days for [3H]TdR incorporation (B and D). Incubations and assays were carried out as described in Materials and Methods. Data represent the mean and standard deviation for triplicate samples.
|
|
|
|---|
The PinPoint vector system allows the production of unique, monobiotinylated proteins which can be affinity purified using SoftLink soft-release avidin resin. In addition, the biotinylation tag can be easily removed enzymatically to produce nonbiotinylated product, should this be required. Therefore, we attempted to use this system to generate a monobiotinylated human IL-2. One potential caveat was the presence of an endogenously biotinylated protein normally present in E. coli, which may coisolate with rbhIL-2. While we did not observe significant levels of this protein in our rbhIL-2 preparation, potential solutions to this problem include dialysis of the rbhIL-2 preparation by using a size exclusion filter through which the endogenous protein can pass but rbhIL-2 cannot. Alternatively, molecular genetic techniques could be used to tag the endogenously biotinylated protein and facilitate its removal from rbhIL-2 preparations. Another caveat, which we did observe, was reduced activity of rbhIL-2 compared to nonbiotinylated rhIL-2. One possible explanation for this observation could be steric interference, or structural alterations, due to the presence of the biotinylation stub.
Having produced a genetically engineered rbhIL-2, we determined whether it could be used to monitor T-cell activation. Traditionally, T-cell activation has been monitored by [3H]TdR incorporation, a process that is closely related to underlying changes in the T-cell number. Other methods to monitor in vitro T-lymphocyte activation include detection of T-cell cytokines such as IL-2 and gamma interferon by ELISA (16), measurement of CD8 T-cell activation by granzyme B enzyme-linked immunospot assay (17), use of the IL-2-dependent cell line CTLL-2, MTT reduction (22), and detection of the lymphoid activation marker CD69 by flow cytometry (20). Additional assays include light absorbency to measure lymphocyte proliferation (6) and a combination of intracellular cytokine expression, cytokine secretion, and cytokine receptor expression (1). However, most of these assays require substantial time and the use of radioactive isotopes and/or are expensive to run.
We provide an alternative method to monitor T-cell activation by using FITC-SA or HRP-SA conjugated to rbhIL-2. This assay can be completed in 1 day and does not require the use of radioactive isotopes. This method is comparable in sensitivity to the traditional [3H]TdR incorporation assay when stimulating cells with PHA and is up to 10-fold more sensitive when analyzing TT-stimulated cells by chemiluminescence techniques (Fig. 6). In addition, the time required to complete the assay is one-quarter to one-sixth of that required to measure [3H]TdR incorporation. It remains to be determined whether the use of a biotinylated anti-CD25 (IL-2R
) MAb would be an equally effective tool for monitoring T-cell activation by the described strategy. However, rbhIL-2 would be expected to bind only IL-2R capable of binding IL-2 itself (3, 21). IL2R binding by rbhIL-2 is indicated by the fact that purified rbhIL-2 stimulates the proliferation of an IL-2-dependent T-cell line whereas similarly purified material from bacteria transfected with a biotinylation vector lacking the IL-2 insert does not (Fig. 2). In addition, rbhIL-2 binds primarily to T cells (Table 1), the binding correlates with CD25 expression (Fig. 3), and it increases with the level of T-cell activation, as measured by [3H]TdR incorporation (Fig. 6). In addition, bhIL-2 would not be expected to bind to Fc receptors, a potential complication when using intact anti-CD25 MAb. Furthermore, therapeutic use of anti-CD25 MAb would probably be problematical, since host Ab would be generated to the variable regions and any mouse components that are present. This is important since rbhIL-2 has the potential for application in vaccines and immunotherapeutics (8, 10, 11, 13). For example, our laboratory has recently developed a targeting strategy which has the ability to target biotinylated proteins to APC (23). We are currently exploring its use in similarly targeting cytokines to APC in order to influence the degree and direction of the immune response. Furthermore, by changing the specificity of the targeting component, it may also be possible to target biotinylated cytokines to tumors, a strategy previously shown to be effective for the elimination of cancer cells (8, 10, 11, 14).
In summary, an rbhIL-2 has been generated which has potential application not only in immunodiagnostics but in clinical immunotherapeutics as well.
We thank the members of the Flow Cytometry Core Facility at Albany Medical College for their assistance and for the use of the equipment and facilities.
|
|
|---|
R1-streptavidin construct and microspheres coated with biotinylated antigen. Biomol. Eng. 20:21-33.[Medline]
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»